FINELINK 49 Inch Capacitive Multi Touch Panel For Kiosk Digital Display Screens, support color, size, shape and logo customization. It can support 10-point touch, glove touch, waterproof touch, etc. Please contact us for a free quote.
A 49 inch touch screen is a type of display technology that uses the electrical properties of the human body to detect touch input. It is designed to support multiple touch points, allowing users to interact with the display using multiple fingers or hands at the same time.
| Item | 49 inch capacitive touch panel |
| Ratio | 16:9 |
| Structure | G+G |
| Type | Capacitive |
| Touch controller | EETI/ILITEK |
| Connection | COB |
| Lens OD | 1136*668mm |
| Sensor OD | 1103*633mm |
| Cover glass(T) | 4mm |
| SENSOR(T) | 1.1mm |
| Surface hardness | ≥6H |
| Transmittance | ≥85% |
| Touch points | 10 Points |
| Operating Temperature | -20℃~+60℃ |
| Interface Type | USB, RS232, I2C |
| Color | Black, White, Transparent, colors optional |
| Customized | AG/AG/AF/AM/AH/Waterproof/Glove touch |
| Operating system | WinXP/7/8/10, Android, IOS, Mac, Linux |
| Application | Industrial, medical, banking, consumer, military, education, HMI.... |
| Warranty | 12 Months（3 years maximum) |
|
ITMES |
SPECIFICATIONS |
|
Panel Size |
49.0 inch |
|
Structures |
Glass/Glass |
|
Total Thickness |
5.3 ± 0.3 mm (Cover_4.0 mm & Sensor_1.1 mm) |
|
Operation Conditions |
-20℃~+60℃ at Min 45% to Max 85% RH |
|
Storage Conditions |
-30℃~+75℃ at Min 45% to Max 85% RH |
Note1：In order to make a touch panel operate normally, please make sure that the host device is grounded.
Note2：All environmental characteristics listed as above all should be less than1 atmosphere.
Note3：The touch panel must be assembled with LCD panel by VHB or other materials, the control board also be fixed
on LCM bezel or other mechanical parts of the system and then be grounded;
Note4：The touch panel may be damaged functionally or unstable if the panel does not be grounded through your system
to earth.
|
ITMES |
SPECIFICATIONS |
|
Cover Lens O.D. |
1136.78mm*668.01mm*4.0mm |
|
Sensor Glass O.D. |
1103.3mm*633.7mm*1.1mm |
|
C/L Visual Area |
1072.78mm*603.01mm |
|
FPC/COF Thickness |
0.3 mm ± 0.03 mm |
Touch sensitivity: This refers to the ability of the panel to accurately detect touch input, and is typically measured in terms of the minimum force required to register a touch.
Touch accuracy: This refers to the precision with which the panel is able to detect and locate touch input, and is typically measured in terms of the size of the touch target and the deviation from the intended touch location.
Response time: This refers to the speed at which the panel is able to detect and respond to touch input, and is typically measured in milliseconds.
Resolution: This refers to the number of pixels that make up the display, and is typically measured in terms of the width and height of the display in pixels. A higher resolution will result in a clearer and more detailed image.
Viewing angle: This refers to the range of angles from which the display can be viewed without significant degradation in image quality.
Brightness: This refers to the amount of light that the display is able to output, and is typically measured in candelas per square meter (cd/m²). A higher brightness allows for better visibility in bright environments.
Contrast ratio: This refers to the difference between the darkest and lightest parts of an image, and is typically measured as a ratio. A higher contrast ratio results in a wider range of distinguishable shades and a more realistic image.
Color accuracy: This refers to the ability of the display to accurately reproduce colors, and is typically measured in terms of the difference between the intended and displayed colors. A higher color accuracy results in a more accurate and realistic image.
Multi-touch capability: This refers to the ability of the panel to accurately detect and track multiple touch points at the same time. The number of touch points that a panel can support will vary depending on the specific design and technology used.
Learn more about the indicators and key performance of capacitive touch screens
Finelink capacitive touch screen can choose different surface treatment covers, such as common AR (anti-reflection and anti-reflection), AG (anti-glare), AF (dust and fingerprint proof) and special cover surface treatment AH (heat-proof), AM (antibacterial) and so on, different surface treatment covers will have different effects.
Finelink capacitive touch screen IC mainly uses IITEK and EETI chips, which have the characteristics of good stability, high cost performance and strong versatility. With three optional interface methods of I2C, USB and RS232, it can meet the needs of various users.
The product meets the specification requirement of the ROHS standard criteria.
FINELINK will provide 12 months product guarantee under normal operation Conditions.
If the panel will be used in extreme conditions such as high temperature, high humidity, high altitude or long operation time etc., It is strongly recommended to contact FINELINK for field application engineer’s advice. Otherwise, Its reliability and function may not be guaranteed.
|
ITMES |
EXPLANATION |
|
Storage |
A touch panel should be stored under the environment temperature and humidity controlled as suggested. Do not store a touch panel in direct sunlight. |
|
Handling |
Unpack the carton with the printed red arrow pointing up. Hold a touch panel body instead of the FPC/COF all the time. Avoid that the surface of the sensor glass is polluted after removing the protect film when assembly. |
|
Cleaning |
Prevent using any kind of the chemical solvent, acidic or alkali solution when cleaning. Neutral detergent or isopropyl alcohol was suggested if the panel is cleaned. |
|
Assembly |
Do not apply rough force such as bending or twisting to the touch panel during assembly. Excessive force or strain to the panel or FPC/COF is prohibited. Past VHB tape or sponge with adhesive on the gap between a touch panel and a LCD module to segregate water and dust contamination. |
|
Operation |
The panel must be operated in a steady environment, the abrupt change of the environment conditions may cause the malfunction of the panel. In order to guarantee all functions of a touch panel stable, please make sure that system is grounded or a power adapter is connected correctly to ground loop (Connection to earth ground is suggested). Do not pull the interface connector in or out while the touch panel is operating. Any sharp edged or hard objects are interdiction to hitting when touch panel operation. |
Finelink capacitive touch screen has been recognized by customers in terms of quality, function, after-sales, etc. with high standard reliability and excellent craftsmanship. Finelink capacitive touch screen products can be seen in smart home, industry, banking, outdoor commercial display, education, medical care, smart mirrors, games, transportation (cars, airports, railway stations, subway stations, bus stations) and other fields .
Standard packaging with carton or wooden box
1.The touch panel packing with foam plastic materials;
2.Packing with carton or wooden box.
Express: DHL, UPS, EMS, TNT, Fedex
Other: Air or sea transportation
Unpack the carton with the printed red arrow pointing up.
Hold a touch panel body instead of the FPC/COF all the time.
Avoid that the surface of the sensor glass is polluted after removing the protect film when assembly.
Finelink after 11 years of development, the R&D team has more than 30 designers, most of whom have 5-10 years of experience in the industry, bachelor degree or above, and have successively obtained a number of national certifications and provincial and municipal level certifications. Honor, as of now, there are more than 60 relevant patent certificates. If you have customized needs and you are short of designers, then our designers can customize drawings for you.
Q1: Are you a manufacturer or trading company?
A: Yes, we are a manufacturer specializing in PCAP more than 10 years,
with 30000 ㎡ production facilities located in ShenZhen and HuangGang HuBei City.
Q2: What is your MOQ?
A: We have no MOQ requirement for our standard models, For customized models,
There are different MOQ requirements depends on the size and complexity of customization.
Q3: How long is the warranty period?
A: Generally the warranty period is three years. It depends on different products.
Q4: What is the delivery time of the products?
A: Standard samples in stock can be delivered within 3 days after we received the payment.
7-15 workdays for the customized samples.
15-20 workdays for mass production.
Q5: What is your shipping method?
A: DHL, UPS, FedEx, TNT, Sea Freight.It depends on different customer.
Q6: What is the products application?
A: Widely used in comerical display, education, industrial control, medical, automotive, smart home, optical bonding and other fields.
View More
FINELINK Large size touch panel for horizontal advertising machine and smart charging post
15 Inch IK10 industrial vandalproof interactive capacitive touch panel
15.6 Inch 10 Touch Points Industrial Capacitive Touch Screen Panel
17.3 Inch With Usb Ip65 Waterproof Touch Screen Manufacturers
27" USB EET/ILITEK PCAP capacitive touch screen panel for monitor
55 inch outdoor ILITEK multi-touch large size capacitive touch screen panel
